Home > Knowledge > Content
Screw air compressor cooler cleaning and maintenance
Mar 03, 2018

Screw air compressor cooler in the process of maintenance will be effective according to the circumstances of the environment to periodically clean the cooler model, it will make the compressor at normal temperature, so that it can effectively ensure the machine Have a longer life.

Screw air compressor cooler in the operation of the process of its clogging case, the compressor exhaust temperature will rise, under normal circumstances should be cleaned 1500 hours per hour air-cooled cooler outside, every 1500 hours Water-cooled cooler water side should be cleaned.

Screw air compressor cooler regular cleaning benefits

1. The unit is always working at the ideal operating temperature (95 ℃ below), the performance of the machine, life is good.

2, you can use the cleaning fluid to remove dirt, or when the dirt is thick, clean up quite troublesome, you need to remove the cooler, with the help of mechanical methods to complete the clean-up work.

Screw air compressor cooler cooling medium side of the cleaning steps

Air-cooled cooler

1. Shutdown and confirm that the pressure has been discharged, pull down the main power switch.

2. Open the air cleaner cover, or remove the cooling fan.

3. With compressed air blow to blow the dirt, and then took out the wind guide hood; if dirty, should spray some <BR> degreasing agent and then blow. When it is not possible to clean it by the above method, the cooler needs to be removed, soaked or sprayed with a cleaning solution and cleaned with a brush (no wire brush).

4. Install the cover or cooling fan.

Water-cooled cooler

1. Shutdown and confirm that the pressure has been discharged, pull down the main power switch.

2. Disassemble the cooling water in and out of the water pipe.

3. Into the cleaning solution soak or pump cycle erosion (recoil better).

4. Rinse with water.

5 installed cooling water inlet and outlet pipes.

http://www.tecfree-cooler.com/


Products List