The air compressor oil cooler is convenient for cleaning. After the pressure plate of the air compressor oil cooler device is removed, the plate bundle can be released and the machine can be cleaned after unloading; The oil cooler is a simple heat exchange cooling area or combination of processes. It is only required to add (or reduce) the plate to reach the heat exchange cooling area required to add (or reduce).
The price of air compressor oil cooler is not high. Under the same premise of using data, because the information required for layout is relatively small, the production cost must be low; light weight, because of its thin thickness, the layout will also be It is much heavier. End of the same heat exchange cooling mission, air compressor oil cooler
The required heat transfer area is relatively small.
The air compressor oil cooler has a small footprint, so it is relatively compact in layout, and the cooling heat exchange area per unit volume is 2 to 5 times that of other equipment, and it is not required to reserve regulatory control as other chiller equipment. When repairing the site and thus completing the same cooling mission, it covers approximately 1/5 to 1/10 of the area of the other chillers.
If the air compressor oil cooler uses an automatic drain, check the drain function regularly at this time. Always clean the cooler for dust, etc. Always check the pressure of the refrigerant to determine if the refrigerant is leaking and if there is a change in the capacity of the freezer. Next, when this equipment is in use, it is necessary to check whether the temperature of the condensed water is normal.
The cooling coefficient of the air compressor oil cooler is high. Its layout is excellent from the strength point of view, but it is not aspiration from the cooling point of view. When the air compressor oil cooler is used, it is necessary to pay attention to the equipment. The ripples on the fluid will cause the fluid to turbulent at a small flow rate. Therefore, the air compressor oil cooler has a relatively high cooling coefficient, which is generally 3 to 5 times that of other coolers.